FV-23BWN2H

Window Mount nanoe®X Thermo Ventilator
Suggested Retail Price HK$3,580

Product | Accessories

Highlights

  • Equipped nanoe®X Air-purifying Function to Inhibit the Activity of Airborne, Adhered Bacteria and Viruse

  • Slim Design for Small Window

  • 2 levels Ventilation Speed Control. Up to 220m³/h

  • Maximum Power Consumption: 1,400W

  • Louver Size (mm): 280 (H) x 280 (W)

  • Installation Size (mm): 242 (H) x 238 (W)

Features

  • Equipped nanoe®X Air-purifying Function to Inhibit the Activity of Airborne, Adhered Bacteria and Viruses

  • nanoe®X Device Generate up to 9,600 Billion of Hydroxyl Radicals per second whose amount is 20 times than nanoe®

  • nanoe®X is Effective in Suppressing up to 99.9% Viruses and Bacteria such as Influenza Virus(H1N1,H5N1), Escherichia Coli(O157) and Staphylococcus Aureus(MRSA)

  • nanoe®X Inhibits up to 99.99% of SARS-COV2 virus

  • nanoe®X is Effective to Reduce Odour, like Sweat Odour and Damp Odour, to keep bathroom air fresh

  • nanoe®X Inactivates on Mold to Prevent Musty Odour and Mildew

  • nanoe®X Generates through Condensation and Ionization of Moisture in Air, Eliminates the Need of nanoe® X Unit Replacement

  • Slim Design for Small Window

  • Heating, Clothes Drying, Ventilation and Circulation

  • Window Mount Installation

  • 2 levels Ventilation Speed Control. Up to 220m³/h

  • Auto / Manual Swing Operation

  • RF Wireless Remote Control (Must be paired with the product before use)

  • Water-resistant Body and Remote Control (IPX4)

  • Alleru-buster Filter

  • Maximum Power Consumption: 1,400W

  • Louver Size (mm): 280 (H) x 280 (W)

  • Installation Size (mm): 242 (H) x 238 (W)

  • Body Depth (mm): 286

  • With Timer Setting. Max. Time

    • Heat: 180 mins
    • Vent: CONT.
    • Dry Hot: 360 mins
    • Dry Cool: CONT.
    • nanoe®X: CONT.

Specifications


Window Mount nanoe®X Thermo Ventilator
Living
Thermo Ventilator
HeaterPTC
Installation TypeWindow Mount
Control TypeRF Wireless Remote (Included CR2032 Battery)(Must be paired with the product before use)
Auto SwingYes
HeatingHigh ● Low
DryHot ● Cool
VentilationHigh ● Low
Timer15 ● 30 ● 60 ● 180 ● 360Minute CONT.
Air Volume (Ventilation)220 m³/h
Air Volume (Circulation)130 m³/h
Noise (Ventilation)48 dB
Noise (Heating)48 dB
Wattage (Ventilation)34 W
Wattage (Power Consumption)1,400 W
FilterAntibacterial Filter
No. of Motor / Blade1/1
No. of Exhaust Outlet1
Installation Hole Size242mm(H) x 238mm(W)
Louver Size280mm(H) x 280mm(W)
Power CordNot included

FAQ

Is Thermo Ventilator provided with power cord?

No, the Thermo Ventilator is not provided with power cord. Please purchase them in market.

Can the thermo ventilator adjust manually the temperature of bathroom?

No. When the temperautre is reached to the certain high degree, it will be off until the temperature is lower again.

Can the thermo ventilator be modified to install into different installation ways that are not mentioned in operation manual?

No. It is suggested to install based on the installation manual.

Can the filter be cleaned by water?

No, it is not washable. The filter is equipped with an anti-microbial layer. If it is cleaned with water, the anti-microbial layer will be washed away and the anti-microbial performance will be thus affected. It is suggested to clean by vacuum cleaner.

Does the thermo ventilator need maintenance?

The filter, front panel and panel base of the thermo ventilator should be cleaned regularly to prevent abnormal operation that caused by dust and dirt. For the cleaning guideline, please refer to the operation manual.

How long should the thermo Ventilator be cleaned?

It is suggested to entrust a professional to clean the heater, and remove dust and dirt from the main body when the thermo Ventilator has been used for around 2-3 years.

For service charge and appointment of cleansing service for thermo Ventilator, please contact Service Centre at 2406 5666.

How is the filter cleaning indication lamp off?

Press and hold the MODE button on control panel for 3 seconds. A “beep” sound is heard to switch off the filter cleaning indication lamp and reset the timer.

How is the remote control paired with the Thermo Ventilator?

The remote control must be paired with the Thermo Ventilator before use. Within one minute after the Thermo Ventilator is powered on, press and hold the buttons “HEAT” and “VENT.” on the remote control for 3 seconds to complete the pairing process. When the pairing is successful, three beeps will be heard.

Downloads

User Manual - Installation and Operating Instructions Product Catalogue - Catalogue

Warranty

Online Warranty Registration