Suggested Retail Price HK$13,800
*Scaffolding may be required, depending on the installation environment.
**Self-Cleaning Function is for ensuring the cleanness of the heat exchanger, but not cleaning the filter.
***Currently only available in Hong Kong
Frosting: Frost the heat exchanger
Melting: Melt the dirt with the frost
Cleaning: Clean the heat exchanger by removing dust
nanoe® X is a patented ion technology developed by Panasonic. It is an electrostatic atomization technology that collects invisible moisture in the air and applies high voltage to it to produce "hydroxyl radicals contained in water". The decisive factor is the existence of hydroxyl radicals inside nanoe®X. Hydroxyl radicals are characterized by being strongly oxidative and highly reactive to inhibit a wide variety of air-pollutants, associated with the effect of skin and hair motorization, which provides the best quality of air to your family.
The negatively charged nanoe-G adheres with PM2.5, inhibit up to 99% PM2.5*1,bacteria and viruses(e.g., staphylococcus aureus*2, influenza [H1N1]*2, Escherichia coil phage*2)
nanoe-G ion generator releases negative ions.
Negative ions attach to dust particles.
The pollutants are being taken to the filter
*1FCG Research Institute lnc Test result *2Kitasato Research Center for Environmental Science test result
PM 2.5 is know as particulate matter with size of less than 2.5 micrometers, which is one of the product of fossil fuel combustion. It is said to pose health problem as it can easily enter human lungs as it is smaller than bacteria.
During anti-mildew operation, the front panel closes, nanoe® will be turned on and horizontal vane opens.
*2 Kitasato Research Center for Environmental Science test result
This function monitors the temperature and humidity of the environment all day long when the air conditioner is in standby mode. The Anti-Mold Monitoring will be able to keep the inside of the air conditioner dry and prevent mold.
Auto-detect: When the temperature around the air conditioner is detected to be above 10℃ and the humidity is above 60% for 12 hours, the anti-mold process will be activated.
Anti-bacterial: During the anti-mold process, nanoe® will be released to proactively inhibits mold growth.
Anti-Mold Operation: While the anti-mold is in operation, the vertical airflow louvers and the front panel will remain closed. A low level of airflow will be emitted, and the nanoe® function will operate simultaneously.
Wi-Fi Inverter Window-Split Type Heat Pump Air-Conditioner (1 1/2HP) | ||
---|---|---|
Living | ||
Air-Conditioner | ||
Outdoor | CU-HZ12BWA | |
Inverter | ● | |
Remote Control | ● | |
Air-purifying System | nanoeX Mark 3+nanoe-G | |
Cooling Capacity | ||
Btu/h | 12,015 | |
kW | 3.52 | |
Heating Capacity | ||
Btu/h | 12,015 | |
kW | 3.52 | |
EER | ||
W/W | 3.43 | |
Seasonal Performance Factor | ||
Cooling Seasonal Performance Factor (CSPF) | 5.511 | |
Heating Seasonal Performance Factor (HSPF) | 5.024 | |
Power Supply | ||
Voltage V | 220 | |
Power Consumption A | Cooling Capacity:5.5; Heating Capacity: 5.3 | |
Input Power kW | Cooling Capacity:1.025;Heating Capacity:1.041 | |
Power Plug | 3-round-pin 15A plug | |
Moisture Removal | ||
L/h | 2.0 | |
Air Circulation(Indoor / Hi) | ||
m³/min. | 11.3 | |
Indoor Unit Dimension(H x W x D) | ||
mm | 315 x 820 x 245 | |
Outdoor Unit Dimension(H x W x D) | ||
mm | 385 x 548 x 471 | |
Net Weight | ||
Indoor Unit | 12 kg | |
Outdoor | 25 kg | |
Piping Diameter | ||
Liquid mm / inch | ψ6.35 / 1/4" | |
Gas mm / inch | ψ9.52 / 3/8" | |
Power Supply | Indoor |
Wi-Fi Inverter Window-Split Type Heat Pump Air-Conditioner (1 1/2HP) | ||
---|---|---|
Living | ||
Air-Conditioner | ||
Outdoor | CU-HZ12BWA | |
Inverter | ● | |
Remote Control | ● | |
Air-purifying System | nanoeX Mark 3+nanoe-G | |
Cooling Capacity | ||
Btu/h | 12,015 | |
kW | 3.52 | |
Heating Capacity | ||
Btu/h | 12,015 | |
kW | 3.52 | |
EER | ||
W/W | 3.43 | |
Seasonal Performance Factor | ||
Cooling Seasonal Performance Factor (CSPF) | 5.511 | |
Heating Seasonal Performance Factor (HSPF) | 5.024 | |
Power Supply | ||
Voltage V | 220 | |
Power Consumption A | Cooling Capacity:5.5; Heating Capacity: 5.3 | |
Input Power kW | Cooling Capacity:1.025;Heating Capacity:1.041 | |
Power Plug | 3-round-pin 15A plug | |
Moisture Removal | ||
L/h | 2.0 | |
Air Circulation(Indoor / Hi) | ||
m³/min. | 11.3 | |
Indoor Unit Dimension(H x W x D) | ||
mm | 315 x 820 x 245 | |
Outdoor Unit Dimension(H x W x D) | ||
mm | 385 x 548 x 471 | |
Net Weight | ||
Indoor Unit | 12 kg | |
Outdoor | 25 kg | |
Piping Diameter | ||
Liquid mm / inch | ψ6.35 / 1/4" | |
Gas mm / inch | ψ9.52 / 3/8" | |
Power Supply | Indoor |