Pulsator Washing Machine | Free Standard Installation
Enjoy a free standard installation^(worth HK$180) upon purchase of selected Panasonic pulsator washing machine* during the promotion period.
*Eligible models: NA-F65A9, NA-F65A9P, NA-F7G10, NA-F7G10P, NA-F8G10, NA-F8G10P
^Standard installation of pulsator washing machine terms & condition include:
1) Connect washing machine to water supply and drain with original hoses
2) Level the washing machine
3) Install rubber bumper (if necessary)
4) Operation Demonstration
5) Install 1pc drain hose adaptor (if necessary)
6) Connect the power cord of the machine to the power supply (customer must provide a suitable electrical outlet)
Terms and condition apply.
Promotion applicable to Hong Kong and Macau only.
Free Standard Installation is provided by Shun Hing Electric Service Centre Ltd. and is only applicable to the newly purchased and not installed selected pulsator washing machine models.
Promotion is valid from 1 January 2026 to 30 June 2026 (based on date on purchase receipt).
The standard installation fee will be waived upon verification of the purchase receipt by the installation technician.
Installation must be completed on or before 17 July 2026 by Shun Hing Electric Service Centre Ltd..
|
Extra service of installing pulsator (Paid on delivery) |
HK$ | ||
| 1 | Dismantle used washing machine (If necessary, not include removal service) | unit | 100 |
| 2 | Dismantle used clothes dryer (If necessary, not include removal service) | unit | 100 |
| 3 | Change to 13A socket | each | 200 |
| 4 | Connect the power supply | unit | 50 |
| 5 | Install extended brass water piping or PVC tube | (feet) | 60 |
| 6 | Install brass water piping or PVC accessories | each | 60 |
| 7 | Open wooden hole less than 2 inches of diameter in the kitchen cabinet | each | 100 |
| 8 | #Lift the new washing machine and install it between the washbasin and the toilet. (Pleases make sure there is enough space) (The maximum height for crossing obstacles is 500mm) | unit | 400 |
| 9 | #Put in the new washing machine and install it between the washbasin and the toilet. (Pleases make sure there is enough space) (The maximum height for crossing obstacles is 500mm) | unit | 400 |
| 10 | Add deodorant drainage trap | each | 100 |
| 11 | Change washing machine tap (Specific type) | each | 150 |
| 12 | Install or dismantle top plate of washing machine (Not include parts fee) | (unit) | 180 |
| 13 | Installation at Discovery Bay (Only available on Tuesdays and Fridays - reservation is required) | unit | 320 |
| 14 | Installation at outlying islands, restricted area or remote areas | unit | By Quotation |
#Customers must provide sufficient space and the installation technician must conduct an on-site assessment before the procedures can be performed. The maximum height for crossing obstacles is 500mm for both installation or dismantle process. If the installation location is deemed too dangerous or cannot be installed for other technical reasons, the company reserves the right to refuse installation.
Installation remarks:
1. Other items not included in the above additional works/additional services (including scaffolding works) are subject to separate quotation.
